What are the precautions for using hardware etching equipment?

Industry Hardware etching equipment I am in contact with the product every day now. During the etching process, these types of products not only need to pay attention to many details, but also need to adhere to maintenance and some precautions in future use, so that etched metal products can maintain a longer service life. So, let's learn about the precautions when using industrial hardware electroplating equipment.

Precautions for using industrial hardware etching equipment:

1. The effect of metal etching may vary greatly depending on the substrate. You should know that there are many types of substrates for metal products at present, and the composition of each substrate is different. If certain components exceed the specified standards, high-quality coatings may not be obtained during the etching process.

2. The shape of metal products also directly affects the etching effect and operational difficulty. Simply put, today's metal products come in different shapes. The difficulty of industrial hardware etching equipment is also simple, difficult, and straightforward. Usually, the more complex the shape, the greater the difficulty of metal etching technology processing.

3. The surface quality of metal products indicates that the surface quality of metal products is very rough, and the porosity and corrosion resistance cannot meet the etching requirements, so relevant etching processes can be carried out. Even with the etching process, the resulting coating cannot meet the requirements of the enterprise.

4. The processing effect of metal etching technology may vary among different industrial hardware etching equipment. At present, there are imported and domestically produced electroplating equipment on the market. The selection of equipment can have a significant impact on the overall etching quality. However, the etching process requires many necessary professional equipment and tools, so it is recommended to choose large enterprises. In this way, the introduced etching equipment and technology will be more advanced.

5. Surgical related treatments. Before etching, all metal products should be pre treated and measures should be taken to remove oil and rust. This can further improve the etching effect. Poor or excessive removal of oil and rust may result in rough surfaces of metal products and insufficient adhesion of coatings.

Metal products play a very important role in our lives. At present, there are many types of metal products on the market, and different types of metal products need to pay attention to different basic matters in the process of processing industrial hardware etching equipment. Only when industrial hardware etching equipment is familiar with relevant information before processing, can the operation steps of the etching process be accurately carried out, and the overall etching effect can meet the needs of the consumer group.

The process requirements for hardware etching equipment are as follows:

1. There should be good adhesion between the coating and the base metal, as well as between the coatings themselves.

2. The coating should be crystalline, smooth, and of uniform thickness.

3. The coating should have the specified thickness and as few pores as possible.

4. The coating should have specified indicators such as brightness, hardness, conductivity, etc.

5. The etching time and temperature determine the coating thickness.

6. The ambient temperature ranges from -10 ℃ to 60 ℃.

7. The input voltage is 220V ± 22V or 380V ± 38V.

8. The high working noise of water treatment equipment shall not exceed 80dB (A).

9. The relative humidity (RH) shall not exceed 95%.

10. The COD content of raw water ranges from 100mg/L to 150000mg/L.